Preventing Drafts Through Windows
By NW Door and Window Repairs
Do You Have Drafty Windows At Home?
Have you ever noticed a cold draft coming in through your windows during the winter months, making your home feel colder than it should?
Drafts can be a common problem for homeowners, and they can make your home less comfortable and less energy-efficient.
But what causes drafts through your windows at home, and what can you do about it?
In this blog post, we’ll explore the common causes of drafts through windows and some ways to prevent them.
Disclaimer:
Please note that some of the links in this blog post are affiliate links.
This means that we may earn a commission if you make a purchase through these links.
Using our affiliate links will not cost you any additional fees or charges.
We appreciate your support in helping us to continue providing valuable content and recommendations to our readers.
Causes Of Window Drafts
1. Poorly-sealed windows:
One of the most common causes of drafts through windows is poorly-sealed windows.
Over time, the seals around your windows can become worn or damaged, allowing cold air to seep in and warm air to escape.
You may notice this problem more in older homes, where the seals may have deteriorated over time.
If you suspect that poorly-sealed windows are causing drafts in your home, you may need to replace the seals or even replace the windows themselves.
2. Gaps around windows:
Another common cause of drafts through windows is gaps around the windows.
This can occur if the windows were not properly installed or if the frame has shifted over time.
Gaps can allow cold air to seep in, causing drafts and making your home less comfortable.
If you suspect that gaps around your windows are causing drafts, you may need to have the windows reinstalled or have the frames repaired.
3. Single-pane windows
Single-pane windows are another common cause of drafts through windows.
These have only one layer of glass, which can allow heat to escape and cold air to enter your home.
If you have single-pane windows, you may want to consider upgrading to double- or triple-pane windows, which are much more energy-efficient and can help prevent drafts.
4. Cracks in windows
Cracks in windows can also cause drafts in your home.
They can occur due to a variety of reasons, such as age, weather, or accidental damage.
If you notice cracks in your windows, you may need to replace the glass or even the entire window to prevent drafts.
5. Window location
Finally, the location of your windows can also contribute to drafts.
If your windows are located in areas that are exposed to the wind or other weather elements, they may be more prone to drafts.
You may need to consider installing storm windows or window film to help prevent drafts in these areas.
Our 6 Step Guide On How To Prevent Drafts Through Windows
Step 1: Inspect Your Windows
Start by inspecting your windows to determine if there are any gaps or cracks that could be allowing drafts.
Look for any signs of damage or wear and tear.
Check the seals around the windows and the frames for any gaps or cracks.
If you notice any gaps or cracks, note their locations, as you’ll need this information for later steps.
Step 2: Apply Weatherstripping
Weatherstripping is an affordable and easy way to seal gaps around windows.
There are several types of weatherstripping available, including foam, rubber, and silicone.
Choose the type of weatherstripping that best suits your needs and apply it to any gaps or cracks around your windows.
Make sure to clean the area around the gap or crack before applying the weatherstripping to ensure it sticks properly.
Materials Required
Weatherstripping (foam, rubber, or silicone), scissors or utility knife, cleaning cloth
Step 3: Install Draft Stoppers
Draft stoppers are long, thin pillows that are designed to block drafts from coming in under doors and windows.
They’re an affordable and easy way to prevent drafts from entering your home.
Simply place the draft stopper along the bottom of the window to block the draft from coming in.
Materials Required
Step 4: Install Window Film
Window film is a clear, plastic film that you can apply to your windows to create an extra layer of insulation.
It’s an affordable way to prevent drafts and can also help reduce your energy bills.
To install window film, measure the size of your windows and purchase a roll of film that’s slightly larger than your window.
Apply the film to the window using a squeegee or a credit card to remove any air bubbles.
Materials Required
Window film, measuring tape, scissors or utility knife, squeegee or credit card
Step 6: Upgrade to Double- or Triple-Pane Windows
If your windows are old or single-pane, you may want to consider upgrading to double- or triple-pane windows.
These windows are much more energy-efficient and can help keep your home more comfortable while reducing your energy bills.
Contact NW Door and Window Repairs to get a quote and schedule an installation.
Preventing Drafts Though Your Windows: Conclusion
In this blog post, we discussed the causes of drafts through windows in your home and provided a comprehensive, step-by-step guide on how to prevent them. From applying weatherstripping and installing draft stoppers to upgrading to double- or triple-pane windows, there are many affordable and easy solutions to keep your home comfortable and energy-efficient.
By following the tips outlined in this guide, you can say goodbye to pesky drafts and enjoy a cozier home all year round.
Contact NW Door and Window Repairs
NW Door and Window Repairs can provide expert assistance in fixing various window problems, from drafts and condensation to broken glass and stuck windows.
With our professional expertise and reliable solutions, you can ensure that your windows are restored to optimal condition.
This will provide you with comfort, energy efficiency, and peace of mind in your home.
Contact NW Door and Window Repairs today for all your window repair needs.